Decibel Calculator

Decibels are logarithmic, so they cannot be added or scaled like ordinary numbers. Two 80 dB sources make 83 dB, not 160. This calculator adds and subtracts sound levels, finds the level at a new distance, and converts between decibels, ratios and pascals.

Combine sound sources: two equal sources add 3 dB, not double the decibels.

Combined level: -- dB

Why decibels need their own math

A decibel value is the logarithm of a ratio. Every 10 dB step multiplies sound intensity by 10, so 80 dB carries ten times the energy of 70 dB. To combine levels you first undo the logarithm, do the arithmetic on the underlying energies, and then convert back. The five tabs above do this for you. The background is on our what is a decibel page.

1. Add sound levels

Formula: L = 10·log10(10L1/10 + 10L2/10 + …)

Example. Three machines measure 85, 88 and 90 dB on their own. Their relative energies are 108.5, 108.8 and 109.0. The sum is about 1.95 × 109, and 10·log10 of that is 92.9 dB.

A quick rule for two sources:

Difference between the two levelsAdd to the higher level
0 dB (equal)3.0 dB
1 dB2.5 dB
3 dB1.8 dB
6 dB1.0 dB
10 dB or more0.4 dB or less

So two 80 dB sources give 83 dB, and a 70 dB source next to an 85 dB one changes almost nothing. The formula assumes unrelated sources, such as separate machines or voices.

2. Subtract background noise

Formula: L = 10·log10(10Ltotal/10 − 10Lbg/10)

Example. With a pump running you measure 72 dB. With it switched off, the room is 68 dB. The pump alone is 10·log10(107.2 − 106.8) = 69.8 dB.

If the total is less than about 3 dB above the background, the answer swings widely with tiny measurement errors, so treat it as unknown. If the total is 10 dB or more above the background, the correction is under 0.5 dB and you can skip it.

3. Level at a distance (inverse square law)

Formula: L2 = L1 − 20·log10(r2/r1)

Sound from a small source spreads over a sphere. The same energy covers four times the area at twice the distance, so intensity falls with the square of the distance. In decibels that is about 6 dB less for every doubling of distance, and 20 dB less for every tenfold increase.

Example. A generator measures 90 dB at 2 m. At 8 m: 90 − 20·log10(8/2) = 90 − 12.0 = 78.0 dB.

4. Ratio to dB and back

Power or intensity: dB = 10·log10(P1/P0) and ratio = 10dB/10

Amplitude (sound pressure, voltage): dB = 20·log10(A1/A0) and ratio = 10dB/20

The factor is 20 for amplitudes because power is proportional to amplitude squared.

Examples. An amplifier going from 50 W to 100 W gains 10·log10(2) = 3.0 dB. Doubling a voltage gains 20·log10(2) = 6.0 dB. Going the other way, −3 dB is half the power, and +6 dB is 2.0 times the amplitude.

dBPower ratioAmplitude ratio
+3×2×1.41
+6×4×2
+10×10×3.16
+20×100×10
−10×0.1×0.316

5. dB SPL to pascals

Formula: p = 20 µPa × 10L/20, and in reverse L = 20·log10(p / 20 µPa)

Sound pressure level (dB SPL) compares a sound pressure with the reference of 20 micropascals (0.00002 Pa), which is 0 dB.

Examples. 94 dB SPL is 0.00002 × 104.7 = 1.0 Pa. Conversation at 60 dB is 0.02 Pa. A pressure of 0.1 Pa is 20·log10(0.1 / 0.00002) = 74.0 dB. At 120 dB the pressure is 20 Pa, still only about 0.02% of normal atmospheric pressure.

Where to go next

See everyday levels on the decibel chart, read about exposure limits on safe decibel levels, or work out a daily dose with the noise exposure calculator. How the scale itself works is covered on the decibel scale page.

Sources

Frequently asked questions

How do you add decibels?

Convert each level to a power ratio with 10^(L/10), add the ratios, and convert back with 10 x log10 of the sum. Two equal sources always give 3 dB more than one of them.

What is the decibel formula?

For power or intensity, dB = 10 x log10(P1/P0). For amplitudes such as sound pressure or voltage, dB = 20 x log10(A1/A0). Sound pressure level uses a reference pressure of 20 micropascals.

How much does sound drop when you double the distance?

About 6 dB for a small source outdoors with no reflections. Indoors the drop is smaller, because reflected sound fills the room.

How many decibels is twice the power?

About 3 dB. Doubling the power adds 3 dB and doubling the sound pressure or voltage adds 6 dB. A sound needs roughly 10 dB more to seem twice as loud.

How do I subtract background noise from a measurement?

Measure the total level with the source on and the background level with it off, then use the subtract tab. The result is reliable only when the total is at least about 3 dB above the background.

What is 94 dB in pascals?

94 dB SPL is a sound pressure of almost exactly 1 pascal, which is why 94 dB is the usual calibrator level.

Updated

Tools and guides