What the tone generator does
The tool above produces a steady test tone in your browser. Nothing is downloaded and nothing is recorded.
- Frequency from 20 Hz to 20,000 Hz. Use the slider (it is logarithmic, so each octave gets equal space), type an exact value, or nudge it with the ±1 Hz and ±0.1 Hz buttons.
- Four waveforms. Sine, square, triangle and sawtooth.
- Volume and channel. Set the level and send the tone to the left speaker, the right speaker or both.
- Presets. 20, 50, 100, 440 (A4), 1,000, 5,000, 10,000 and 15,000 Hz.
- Nearest musical note. The display shows the closest note to the current frequency.
- Sweep mode. Set a start frequency, an end frequency and a duration. The sweep is logarithmic, so it spends the same time in every octave.
- Shareable link. The address stores your settings, for example
?f=440&w=sine.
What people use it for
- Testing speakers and subwoofers. Play 20 to 100 Hz to find where a subwoofer starts to respond, or run a slow sweep and listen for rattles, buzzes and drop-outs. To check each side separately, use the left/right speaker test.
- Checking your hearing range. Step up through the high presets and note where the tone disappears. This is a curiosity check and not a hearing test. Results depend heavily on your headphones and volume.
- Tuning reference. 440 Hz is the standard pitch for A4. Play it and tune your instrument by ear.
- Science class. Show how frequency relates to pitch, compare waveforms, or view the tone on the spectrum analyzer on a second device.
- Finding room problems. A slow low-frequency sweep makes room resonances obvious: some notes boom and others nearly vanish as you move around.
Some people look for particular frequencies such as 432 Hz or 528 Hz. The generator will play any of them precisely. We make no health claims about any frequency.
What the waveforms sound like
All four waveforms repeat at the frequency you set, so they have the same pitch. They sound different because of their harmonics: extra tones at whole-number multiples of the base frequency.
| Waveform | Harmonics | Sound |
|---|---|---|
| Sine | None. One frequency only | Pure, smooth, flute-like |
| Triangle | Odd harmonics only (3rd, 5th, 7th…), fading very quickly: the nth is 1/n2 of the fundamental | Soft, slightly brighter than sine |
| Square | Odd harmonics only, fading slowly: the nth is 1/n of the fundamental | Hollow and buzzy, like an old video game |
| Sawtooth | All harmonics, odd and even, each 1/n of the fundamental | Bright and harsh, like a bowed string or brass |
For speaker and hearing checks, use sine. A 100 Hz square wave also contains energy at 300, 500 and 700 Hz, so a small speaker that cannot reproduce 100 Hz will still make a sound. A square wave also carries twice the power of a sine at the same slider position, and both square and sawtooth waves sound much harsher, so lower the volume before you switch.
How frequency relates to pitch
Frequency is the number of vibrations per second, measured in hertz (Hz). Higher frequency means higher pitch. The relationship is logarithmic: each time the frequency doubles, the pitch rises by one octave.
| Frequency | What it is |
|---|---|
| 20 Hz | The usual lower limit of hearing. More felt than heard |
| 50–100 Hz | Deep bass. Needs a subwoofer or good headphones |
| 220 Hz | A3, one octave below A4 |
| 440 Hz | A4, the standard tuning pitch |
| 880 Hz | A5, one octave above A4 |
| 1,000 Hz | The standard reference tone for audio and acoustic measurements |
| 5,000 Hz | Upper treble, near the range where hearing is most sensitive |
| 10,000–15,000 Hz | Very high treble. Often inaudible on small speakers |
In standard tuning, each of the 12 semitones in an octave is about 5.9% higher in frequency than the one below it. That is why the slider is logarithmic: equal distances on it sound like equal steps in pitch.
Hearing range and age
The range of human hearing is usually given as 20 Hz to 20,000 Hz. Few adults hear the whole range. Age-related hearing loss is gradual, usually affects both ears, and tends to show first with higher-pitched sounds, so the upper limit creeps downward over the years. Noise exposure adds to this. If you cannot hear the 15,000 Hz preset, that is not unusual for an adult, and cheap speakers may not be producing it anyway.
If you have concerns about your hearing, see an audiologist. A browser tone cannot diagnose anything. For how loud is too loud, see safe decibel levels, and you can measure the level of a tone in your room with the decibel meter.
Sources
- HyperPhysics (Georgia State University): Sensitivity of the human ear (audible range 20 Hz to 20,000 Hz; ear canal resonance at 2,000–5,000 Hz)
- HyperPhysics: Geometric waveforms (harmonic content of square, triangle and sawtooth waves)
- ISO 16:1975, Acoustics: Standard tuning frequency (standard musical pitch, A = 440 Hz)
- NIDCD: Age-Related Hearing Loss (Presbycusis)
- MedlinePlus: Age-related hearing loss
- NIDCD: Noise-Induced Hearing Loss
- Elliott Sound Products: Why do tweeters blow when amplifiers distort? (long-term tweeter power handling)
Frequently asked questions
What frequency range can the tone generator play?
Any frequency from 20 Hz to 20,000 Hz, the range usually given for human hearing. You can set it with the slider, type a value, or step by 1 Hz or 0.1 Hz.
Why can't I hear the 15,000 Hz tone?
Either your speakers or headphones cannot reproduce it, or your ears no longer pick it up. High-frequency hearing fades gradually with age, so this is not unusual for an adult. Do not turn the volume up to compensate.
Why can't I hear 20 Hz or 50 Hz on my phone or laptop?
Small speakers cannot move enough air to reproduce very low frequencies. Use headphones, larger speakers or a subwoofer, and keep the volume low while you test.
Can a tone generator damage speakers?
It can if the volume is high. A steady tone puts continuous power into one driver, and tweeters in particular tolerate far less long-term power than a speaker's rated wattage suggests. Keep tones quiet and short.
What is 440 Hz?
440 Hz is the note A above middle C (A4), the standard tuning reference used by orchestras and tuners.
Which waveform should I use for testing?
Use sine. It contains a single frequency, so what you hear is the speaker or the room and not the harmonics of the test signal.
Updated