What the noise monitor does
The decibel meter on our homepage answers "how loud is it right now?" The noise monitor answers a different question: how loud was it, when, and for how long? It is built for long sessions such as an evening of music from next door, a night of traffic, or a full day in a workshop.
- One reading per second, for hours. The monitor logs the A-weighted level (dBA) every second.
- Timeline graph of the whole session, so you can see at a glance when the noise started and stopped.
- Threshold and events list. Pick a level. Every time the sound stays at or above it, the monitor records an event with its start time, duration and maximum level.
- Session statistics: LAeq, LAmax, L10, L90, total time above the threshold and the number of events.
- Overnight mode: a dark, dimmed screen that keeps the display awake.
- Auto-stop timer: 1, 2, 4 or 8 hours, or no limit.
- Noise diary report: a printable page with the summary, the chart and the events. Choose "Save as PDF" in your browser's print dialog to keep a file.
- CSV export of the log for a spreadsheet.
- Saved sessions: up to 10, stored in this browser on this device. Nothing is uploaded.
How to run a long session
- Plug the device in. A session of several hours with the screen on will drain a phone battery.
- Open this page and press Start, then allow microphone access.
- Set the threshold. A good starting point is a few decibels above the room's normal level, so that ordinary background sound does not create events.
- Choose an auto-stop time or leave it on "no limit".
- Turn on overnight mode if the bright screen would bother you.
- Leave the page open and the screen on. Do not switch apps or lock the phone.
LAeq, LAmax, L10 and L90 explained
| Statistic | What it is | What it tells you |
|---|---|---|
| LAeq | The equivalent continuous level: the steady level with the same sound energy as the whole session | One figure for the overall noise. It is the quantity used in most health guidance. |
| LAmax | The highest level logged | The loudest single event, such as a slammed door or a bark |
| L10 | The level exceeded for 10% of the time | How loud the noisy moments typically are |
| L90 | The level exceeded for 90% of the time | The background level when the intrusive noise is absent |
LAeq is an energy average, not the middle of the readings. Because decibels are logarithmic, one loud minute outweighs many quiet ones (see the decibel scale). The US Federal Highway Administration makes the same point: Leq is a measure of sound energy and should not be confused with a statistical level such as L50.
The gap between L10 and L90 is often the most useful result. A small gap means steady noise, such as a fan or distant highway. A large gap means a quiet background broken by loud events, which is the typical pattern of intermittent neighbor noise.
Documenting neighbor or apartment noise
A level log is most convincing when it shows a pattern over several days. A practical routine:
- Measure where the noise affects you, for example at the bed or the desk, with windows and doors in their usual position. Note that position in the report.
- Record a quiet baseline at a similar time of day when the noise is absent. The difference between the two sessions says more than either number alone.
- Keep a written diary alongside the log. The monitor stores levels, not audio, so it cannot show what a sound was or where it came from. Write down the date, the time, what you heard and how it affected you (woke you, stopped a phone call).
- Repeat on several days and save each noise diary report as a PDF.
- Read your lease or building rules and your local noise ordinance. In the United States, the EPA notes that primary responsibility for noise was transferred to state and local governments, so the rules, quiet hours and any decibel limits depend on where you live.
- Raise it with the right party: the neighbor if that is safe and practical, then the landlord or property manager, then the local authority that handles noise complaints.
A phone log is supporting information, not proof. Ordinances may specify where and how sound must be measured and with what kind of instrument, and officials generally rely on their own measurements or observations. This page is general information and not legal advice.
Placement tips
- Keep the microphone uncovered. On most phones it is on the bottom edge. Remove a thick case and do not lay the phone face-down on bedding.
- Use a stable, soft-footed spot such as a shelf or a table with a cloth under the device. Hard surfaces pass on bumps and vibration.
- Stay away from the device's own noise sources: a laptop fan, a charger that buzzes, a ticking clock, a refrigerator.
- Avoid corners and walls where you can. Reflections raise the reading.
- Keep the setup identical between sessions: same device, same spot, same threshold. Comparisons are only fair if nothing else changed.
- Calibrate if you can. A one-time calibration against a handheld meter makes the absolute numbers far more credible.
Limitations
- It is an estimate. Phone and laptop microphones differ, and an uncalibrated reading can be off by several decibels. See accuracy.
- Very quiet rooms read too high. At night a phone may be showing its own microphone noise floor, so L90 can sit above the true background.
- Low bass is under-read. A-weighting and small microphones both reduce low frequencies, so a neighbor's subwoofer can be more disturbing than the dBA figure suggests.
- Every sound counts. Your own footsteps, a cough or the heating switching on will show up as events. Mark those in your diary.
- Not a compliance instrument. For workplace exposure, see OSHA noise limits; for health guidance, see safe decibel levels.
Sources
- US Federal Highway Administration: sound level descriptors (L10, L50, L90, Leq, Lmax)
- US Federal Highway Administration: Highway Traffic Noise Analysis and Abatement Guidance (definitions of L10 and Leq)
- US EPA: Clean Air Act Title IV, Noise Pollution (role of state and local governments)
- MDN: Screen Wake Lock API (when a wake lock is refused or released)
- CDC/NIOSH: NIOSH Sound Level Meter App (accuracy of phone-based measurement)
Frequently asked questions
How do I record noise from my neighbors?
Place the phone or laptop in the room where the noise bothers you, plug it in, set a threshold and start the monitor. It logs the level every second and lists each period at or above the threshold with its start time, duration and maximum level. It logs levels only, not audio, so keep a written diary of what you heard.
Can I use a phone noise log as evidence in a noise complaint?
Treat it as supporting information, not proof. A phone is not a calibrated instrument, and officials normally rely on their own measurements or observations. A dated log can still help show a landlord or local authority when and how often the problem occurs.
What do L10 and L90 mean?
L10 is the level that was exceeded for 10% of the session, so it describes the louder moments. L90 is the level exceeded for 90% of the session and is commonly used to describe the background noise.
What is LAeq?
LAeq is the A-weighted equivalent continuous level: the steady level that would contain the same sound energy as the varying noise you measured. Loud moments count for much more than quiet ones, so it is not a simple average of the readings.
Can the noise monitor run overnight?
Yes. Overnight mode dims the screen to a dark display and keeps it awake. The phone must stay plugged in, with this page open and the screen on, because browsers stop microphone access when the page goes to the background or the screen locks.
Is my audio recorded or uploaded?
No. The monitor stores sound levels in decibels, not audio. Up to 10 sessions are saved in this browser on this device and nothing is sent to a server.
Updated