Why 1,000 Hz is the reference tone
Whenever sound needs a single agreed reference frequency, 1 kHz is usually the choice. It sits in the middle of the hearing range on a logarithmic scale, the ear is sensitive there, and nearly every speaker and microphone can handle it.
- Loudness. The phon, the unit of loudness level, is defined at 1,000 Hz: a sound of 60 phons is as loud as a 1,000 Hz tone at 60 dB. The equal-loudness contours are all drawn relative to this frequency.
- Frequency weighting. The A-weighting curve used for dBA readings applies no correction at 1 kHz, so a 1 kHz tone reads the same in dBA, dBC and unweighted dB. See what is a decibel for how the weightings differ.
- Calibration. Acoustic calibrators for sound level meters typically produce a 1 kHz tone at a fixed level, commonly 94 dB, which corresponds to a pressure of 1 pascal.
- Hearing tests. Pure-tone audiometry normally begins at 1,000 Hz, because most people hear it easily and results at this frequency are the most repeatable.
- Broadcast and studio line-up. A steady 1 kHz tone is the traditional signal for setting levels between pieces of equipment, and it is the classic "bleep" used to cover words on television.
Practical uses for this page
Play the tone and watch the level on the decibel meter or the peak on the spectrum analyzer using a second device. Because microphones and weightings agree best at 1 kHz, it is the fairest single tone for comparing two meters or two phones. Sent to one channel at a time, it is also a quick left/right check.
Sources
- HyperPhysics: The phon (loudness level referenced to a 1,000 Hz tone)
- American Family Physician: Audiometry screening and interpretation (testing begins at 1,000 Hz)
- HyperPhysics (Georgia State University): Sensitivity of the human ear (audible range 20 Hz to 20,000 Hz)
Frequently asked questions
What is a 1 kHz tone used for?
It is the standard reference in audio and acoustics: sound level calibrators, loudness units, studio line-up tones and hearing tests are all based on 1,000 Hz.
What note is 1000 Hz?
It falls between B5 (987.8 Hz) and C6 (1,046.5 Hz), about a fifth of a semitone above B5.
Can I calibrate a sound level meter with this tone?
Not by itself. A calibrator produces a known sound pressure level, usually 94 dB at 1 kHz. A browser tone has the right frequency, but its level depends on your device and volume setting, so it is not a known reference.
Updated