What the rating means
CPAP manufacturers publish a declared noise figure measured under an international test standard. ResMed's specification for its AirSense 10 AutoSet, a common home machine, gives a sound pressure level of 26.6 dBA with an uncertainty of 2 dBA, measured according to ISO 17510-1:2007 in CPAP mode. The same sheet lists a sound power level of 34.6 dBA. The two numbers describe the same machine: sound power is the total acoustic output, and sound pressure is what a meter reads at the standard's measuring distance.
The test is run under laboratory conditions with the standard tubing attached. It is a fair way to compare machines, but your bedroom is not a laboratory.
How 27 dBA compares
- A whisper is 20 to 30 dB, depending on the source.
- The WHO's 1999 community noise guideline for bedrooms is an average of 30 dB at night.
- A quiet room is about 40 dB and a refrigerator about 55 dB.
In other words, a machine working as designed sits at or below the level recommended for undisturbed sleep. If yours is clearly audible across the room, something other than the motor is usually responsible. See what 30 dB sounds like for a reference point.
Why a CPAP can sound louder than its rating
- Mask leak. Air escaping around the cushion hisses or whistles and is the most common complaint.
- The exhalation vent. Every mask has a deliberate vent; some designs diffuse the flow more quietly than others.
- Higher pressure. The motor works harder at high settings and during automatic pressure increases.
- Humidifier and tubing. Water in the hose gurgles, and a loose chamber can rattle.
- Hard surfaces. A machine on a hollow nightstand can transmit vibration into the furniture.
- Age. A motor bearing that has started to wear produces a whine that was not there when the unit was new.
A sudden change in the sound of a medical device is worth reporting to your equipment supplier. Do not change pressure settings on your own to make it quieter.
Measuring your own machine
Bedroom levels are near the bottom of what a phone microphone can resolve, so readings below about 30 dB are approximate. Still, a comparison is useful. With the room otherwise silent, open the decibel meter, place the phone on the pillow, and note the level with the machine off and then on with the mask sealed against your hand. A jump of more than a few decibels points to a leak or vibration and not the blower. The measurement guide explains how to get steadier low-level readings.
Sources
- ResMed: AirSense 10 AutoSet technical specifications
- WHO: Guidelines for Community Noise (1999)
- ASHA: Noise and Hearing Loss Prevention
- Purdue University: Noise Sources and Their Effects
- Yale Environmental Health & Safety: Decibel Level Comparison Chart
Frequently asked questions
How many decibels is a CPAP machine?
About 27 dBA for current machines. ResMed lists its AirSense 10 AutoSet at 26.6 dBA with a 2 dBA uncertainty under ISO 17510-1.
Is a CPAP machine louder than a whisper?
No. A whisper is about 20 to 30 dB, and a CPAP rated near 27 dBA falls in the same range.
Why is my CPAP suddenly loud?
The usual causes are a mask leak, water in the tubing, a loose humidifier chamber or a worn motor. Ask your equipment supplier to check it.
Updated