60 Hz is the mains frequency in North America
Mains electricity alternates 60 times per second in the United States, Canada, Mexico and parts of Central and South America, as well as in South Korea, Taiwan and western Japan. Most other countries use 50 Hz.
That is why hum in American audio gear is called 60-cycle hum. Play this tone and compare it with the noise you are trying to identify:
- A smooth, low hum at 60 Hz points to direct pickup of the mains field: a single-coil guitar pickup, a turntable, or a signal cable running beside a power transformer.
- A rougher buzz an octave higher, at 120 Hz, is more typical of ground loops and power-supply ripple, because rectified power pulses twice per cycle. Transformers, refrigerators and fluorescent lamp ballasts also vibrate mechanically at 120 Hz.
A hum that matches neither is probably not mains related. The spectrum analyzer will show the peaks directly: mains hum appears as a neat row at 60, 120, 180 and 240 Hz.
60 Hz as a bass test tone
60 Hz is in the heart of the bass range, near the note B1 (61.7 Hz). Most bookshelf and floor-standing speakers reproduce it, and it is the region where the punch of a kick drum sits. Phone and laptop speakers generally cannot play it. If your main speakers are strong at 60 Hz but weak at 40 Hz, a subwoofer would add something.
A room dimension of about 2.9 m (9.4 ft) resonates at 60 Hz, which is close to a common ceiling height and small-room width. Expect the tone to get louder and quieter as you move your head.
Sources
- Wikipedia: Mains electricity by country (50 Hz and 60 Hz regions)
- Wikipedia: Mains hum (hum at twice the line frequency)
- ePanorama: Ground loop problems and how to get rid of them (mains hum and its harmonics)
Frequently asked questions
Why do speakers hum at 60 Hz?
The hum comes from mains electricity, which alternates at 60 Hz in North America. It gets into audio through ground loops, poorly shielded cables, or pickups and cartridges that sense the magnetic field from nearby transformers.
Is mains hum 60 Hz or 120 Hz?
Both occur. Direct magnetic pickup gives a 60 Hz hum. Ground loops, power-supply ripple and vibrating transformer cores produce 120 Hz and higher harmonics, which sound buzzier.
What note is 60 Hz?
It falls between B♭1 (58.3 Hz) and B1 (61.7 Hz), about half a semitone flat of B1.
Which countries use 60 Hz?
The United States, Canada, Mexico, parts of Central and South America, South Korea, Taiwan, and western Japan, among others. Most of the rest of the world uses 50 Hz.
Updated