What a 100 Hz tone is used for
100 Hz is upper bass, just above the note G2 (98 Hz). It is low enough to have weight and high enough that most speakers bigger than a phone can reproduce it.
- Subwoofer handover. In systems with a subwoofer, the crossover is commonly set somewhere around 80 to 120 Hz, so a 100 Hz tone is played partly by the subwoofer and partly by the main speakers. If it sounds much weaker or stronger than 60 Hz at the same volume, the two are not blending well, and the subwoofer level, crossover or phase setting may need adjusting.
- Small-speaker check. A portable or desktop speaker that plays 100 Hz clearly has usable bass. Many phones and thin laptops are already fading here.
- Identifying hum. Where mains power is 50 Hz, ground loops and power supplies produce a buzz at 100 Hz, twice the line frequency. In 60 Hz countries the equivalent is 120 Hz.
- Physics demonstrations. The wavelength is about 3.4 m, large enough to map standing waves in a classroom by walking between loud and quiet spots.
Why it sounds uneven in a room
Around 100 Hz, ordinary rooms have several resonances close together. A distance of 1.7 m between two surfaces (about 5.6 ft) resonates at 100 Hz, and longer dimensions hit it with their second or third mode. Bass at this frequency can be loud in one seat and thin in the next. Moving the speaker or the listening position by half a meter often changes the result more than any setting does.
For a full bass check, run a 20 to 200 Hz sweep on the main tone generator, or test each side with the speaker test.
Sources
- Sonarworks: Room modes (axial mode formula)
- ePanorama: Ground loop problems and how to get rid of them (mains hum and its harmonics)
- HyperPhysics (Georgia State University): Sensitivity of the human ear (audible range 20 Hz to 20,000 Hz)
Frequently asked questions
What does 100 Hz sound like?
A low, warm hum, close to the pitch of a cello's open G string and of a low male speaking voice.
Can phone speakers play 100 Hz?
Poorly. Most phone speakers are very weak at 100 Hz. Larger portable speakers and headphones reproduce it without trouble.
Why is there a 100 Hz buzz in my audio?
In countries with 50 Hz mains, ground loops and power-supply ripple create hum at twice the line frequency, which is 100 Hz. In North America the same fault shows up at 120 Hz.
Updated