30 Hz Tone Generator

Play a steady 30 Hz sine tone for subwoofer and deep-bass testing. This is below the lowest note of a standard bass guitar, so expect to need a real subwoofer.

440Hz

A4

Start at low volume. High frequencies at high volume can damage hearing and tweeters.

Wave
Output
Frequency sweep
Frequency
30 Hz
Nearest note
B0 (-49 cents)
Period
33.3 ms
Wavelength in air
11.4 m (37.5 ft)

What a 30 Hz tone is used for

30 Hz sits in the deepest octave that most sound systems attempt to play. It is close to B0 (30.87 Hz), the lowest string of a five-string bass, and just above the lowest A on a piano (27.5 Hz). In film sound it is the territory of explosions and engine rumble.

That makes it a useful dividing line for equipment:

Room resonance at 30 Hz

A room boosts bass at frequencies where a half wavelength fits between two walls. The first such resonance is at the speed of sound divided by twice the room dimension: 343 ÷ (2 × length in meters). A dimension of about 5.7 m (roughly 19 ft) puts that first mode at 30 Hz. In a room that size, the tone will be loud against the end walls and weak in the middle. Walk around while it plays and you will hear it change.

For a tone at the very edge of hearing, try 20 Hz. For any other value, use the main tone generator.

Sources

Frequently asked questions

What does 30 Hz sound like?

A very deep, soft rumble with almost no sense of pitch. On a good subwoofer you feel it in the room as much as you hear it. On small speakers you will hear little or nothing.

Can my speakers play 30 Hz?

Most laptop, phone, TV and small bookshelf speakers cannot. A dedicated subwoofer or a good pair of sealed headphones usually can.

Why is 30 Hz louder in some parts of the room?

Low frequencies set up standing waves between walls. At a room's resonant frequencies the bass is strong near the walls and weak at certain points in between, so the level changes as you move.

Updated

Tools and guides