How to use the mic test
- Press Test my mic. Your browser asks for permission to use the microphone. Choose Allow.
- Speak at your normal volume. The bar should move with your voice. The thin line marks the recent peak.
- Pick the right microphone from the list if you have more than one, for example a headset and a built-in mic. The list fills in after you allow access.
- Record and play back. Choose 5 or 10 seconds, press Record and say a full sentence. The clip plays back when it finishes. You can save it to your device if you want to compare later.
- Try Voice processing on and off. On, the browser applies echo cancellation, noise suppression and automatic gain, much like a video call. Off, you hear the raw microphone. Changing it restarts the mic.
How to read the result
The number is the input level in dBFS (decibels relative to full scale). 0 dBFS is the loudest signal the input can carry, so the readings are negative. It is not the loudness of the room. For that, use the decibel meter.
- Working: the bar moves with your voice and the status turns green. A typical speaking level fills roughly the middle of the bar.
- Very quiet: the bar barely moves when you speak. Move closer, raise the input volume in your system settings or turn on Voice processing.
- Clipping: the bar hits the red end and the status warns you. The recording will sound harsh or distorted. Move back or lower the input volume.
- No sound getting through: the bar stays empty for a few seconds. The browser has access to a microphone but receives silence. Work through the checklist below.
The panel under the controls shows what the browser reports about the microphone: sample rate, number of channels, and whether echo cancellation, noise suppression and automatic gain are active. Some browsers don't report every value, which shows as n/a.
Microphone not working? Check these
1. Browser permission
- Chrome and Edge: click the icon to the left of the address bar, set Microphone to Allow, then press Test my mic again.
- Firefox: click the permissions icon in the address bar and clear the blocked microphone setting, then try again so Firefox asks you.
- Safari on Mac: Safari > Settings > Websites > Microphone, and set this site to Allow.
- In-app browsers (opened from a social or chat app) often block the microphone. Open the page in Safari or Chrome instead.
2. System privacy settings
| System | Where to allow the microphone |
|---|---|
| Windows 11 | Settings > Privacy & security > Microphone. Turn on Microphone access, Let apps access your microphone, and Let desktop apps access your microphone (browsers count as desktop apps). |
| macOS | Apple menu > System Settings > Privacy & Security > Microphone. Turn on your browser, then quit and reopen it. |
| iPhone and iPad | Settings > Privacy & Security > Microphone. Turn on Chrome, Firefox or the browser app you use. |
| Android | Settings > Apps > your browser > Permissions > Microphone > Allow. Some phones also have a microphone access switch in Quick Settings that blocks every app. |
3. Wrong input selected
Your computer may be listening to a webcam, a monitor or a headset that isn't plugged in. Pick the microphone in the list on this page, and set the default input in your system settings: on Windows 11, Settings > System > Sound > Input; on a Mac, System Settings > Sound > Input. Check the input volume there too.
4. Muted hardware or a busy microphone
- Headsets and USB microphones often have a mute switch or button, and some laptops have a microphone mute key.
- Another app may be holding the microphone, especially call and recording apps. Close them and reload this page.
- If the mic works in other apps but not in the browser, restart the browser. If it fails everywhere, try another USB port, cable or device.
Privacy
The mic test runs entirely in your browser. The audio is analysed on your device to draw the level bar, and the recording is held in memory in this tab. Nothing is sent to our server or anyone else, and the clip disappears when you close or reload the page unless you save it yourself. Read the privacy policy for details.
Want to see your microphone's frequency content? Try the spectrum analyzer. To check your speakers or headphones instead, use the sound test.
Sources
- Google Chrome Help: Use your camera and microphone in Chrome
- Mozilla Support: How to manage your camera and microphone permissions with Firefox
- Microsoft Support: Turn on app permissions for your microphone in Windows
- Apple Support: Control access to the microphone on Mac
- Apple Support: Control access to hardware features on iPhone
- Android Help: Change app permissions on your Android phone
- MDN: MediaTrackConstraints (echoCancellation, noiseSuppression, autoGainControl)
- MDN: MediaRecorder (local recording in the browser)
Frequently asked questions
How do I test my microphone?
Press Test my mic and allow microphone access when your browser asks. Speak normally: the level bar should move with your voice. Then press Record, say a sentence and listen to the playback.
Is my recording uploaded or saved?
No. The level meter and the recording run entirely in your browser. The clip exists only in this tab until you close or reload it, unless you choose to save it to your own device.
Why doesn't the mic test ask for permission?
You probably blocked the microphone for this site earlier, or your system privacy settings block the browser. Click the icon to the left of the address bar to reset the site permission, then check the system settings listed on this page.
Why is my microphone so quiet?
Move closer, check the input volume in your system sound settings, and make sure the right microphone is selected. Headset mics are often muted with a switch or a button on the cable. Turning on Voice processing adds automatic gain, which raises quiet voices.
Why does my voice sound different on calls than in the recording?
Call apps apply echo cancellation, noise suppression and automatic gain. Turn Voice processing on to hear something close to a call, or off to hear the raw microphone. Bluetooth headsets also switch to a lower-quality mode while the mic is in use.
Can I test my mic on an iPhone or Android phone?
Yes, in Safari, Chrome or Firefox. If access is blocked, allow the microphone for the browser in your phone's privacy or app permission settings, then reload the page.
Updated